Q & A on the most popular operation procedures for

2022-08-07
  • Detail

Q & A on the operating procedures for paper cutting, folding, stapling and sewing (Part 2)

what are the operating procedures for the sewing machine

answer: the operating procedures of the sewing machine include automatic, semi-automatic and single machine procedures

(1) all preparations shall be made before starting the machine, such as oil injection, rough inspection of equipment conditions, and inspection of whether the posted route is dirty

(2) correctly adjust the stapling distance and number according to the book size, and the type and model of the selected stapling suture shall meet the requirements of the national standard

(3) the sewing machine shall strictly abide by the principles of the previous process when storing the stitches, and step on the brake only after the hand is lifted during the procedures (continued stitching on the platform) to prevent personal accidents

(4) do not pile up too many books after sewing to avoid collision

(5) the front and rear cars of the automatic sewing machine (take-up machine and sewing machine) shall be properly coordinated to avoid tearing or collision

(6) once a fault or quality problem is found during the locking process, it shall be stopped in time for treatment. It is strictly prohibited to start the machine for treatment to avoid accidents

(7) the single shift (8-12 hours) shall be cleaned once every two weeks, and the 2 or 3 shifts (16-24 hours) shall be cleaned once a week. The cleaning time is generally 4 hours

(8) do a good job of handover to ensure the normal production of the next shift

what are the operating procedures for the horse riding order linkage production line

answer: the operating procedures of the horse riding joint production line mainly include the following points:

(1) all preparations should be made before starting the machine, such as oiling, checking the equipment, checking whether there is oil dirt on the posted route, etc

(2) correctly adjust the position of the storage and pasting stop gauge and the suction nozzle of the page setter according to the size of the book, and the accuracy of the static wind indication: the whole process is not divided by 1%; Quantity, etc

(3) correctly adjust the setting distance and pressure of the stapler head, the specifications of the wire diameter and the rules of the cutter according to the book size and thickness

(4) adjust the accuracy of photoelectric control part according to the requirements of a stack of numbers in books

(5) when starting up and running, it is necessary to send a signal to empty the vehicle, and the normal operation can be carried out only after the sample book is verified to be correct

(6) in case of any fault during normal operation, stop the machine for treatment. Do not start the machine for troubleshooting. After the fault is eliminated, wait until the signal is correct before normal operation

(7) the single shift (8-12 hours) shall be cleaned once every two weeks, and the 2 or 3 shifts (16-24 hours) shall be cleaned once a week. The cleaning time is generally 4 hours

(8) do a good job of shift handover to ensure the normal production of the next shift

what are the operating procedures for the wireless adhesive stapler

answer: the operating procedures of the wireless adhesive binding stand-alone machine mainly include the following points:

(1) all preparations should be made before starting the machine, including adding glue, preheating glue, adding lubricating oil, and checking whether the main parts and the reading route are dirty

(2) adjust the rules of the book clip support plate according to the book size and thickness. After the adjustment, the car should be plugged in or shut down, and it can be operated only after there is no error

(3) during normal operation, observe the operation of the machine at any time to hear abnormal sound In case of any fault, stop the machine for treatment {including checking the temperature of the glue);

(4) do a good job of post shift cleaning, such as brushing the clamping plate, cleaning the work site, etc., and do a good job of shift handover;

(5) clean the glue pot on time for women at home. Under normal operation, clean the pre glue pot once a quarter, and clean the working glue pot once a week to ensure that the glue pot is clean and free of carbonization;

(6) under normal operation of the equipment, clean the glue pot in a single shift (8 ~ 12 hours) wipe and inspect once every two weeks, and wipe and inspect once every week for 2 or 3 shifts (more than 16 hours). In case of any problem found during the wiping and inspection, timely adjust or replace the vulnerable parts in the schematic diagram of the working principle of the tension machine

Copyright © 2011 JIN SHI